Perforated Cable Tray Roll Forming Machine
Main features
Our cable tray roll forming machine is capable of making different
sizes of cable trays through automatic adjust and replacing
punching mold. The cable trays produced by this roll forming
production line are extensively used in petroleum, chemical,
electric power, light industry, television, and telecommunications.
In order to improve punching precision, we adopt servo feeding
technology to make sure that the punching accuracy can reach more
or less than 0.15 mm.In consideration of decreasing sheet
distortion caused by rear cutting, cable tray roll forming machine
is designed with front cutting device. This roll forming production
line is also equipped with a proper guiding device to ensure that
the front-cutting sheet can be fed into the roll former correctly.
Working flow
Decoiler——Feeding——Punching&Cutting——Roll forming——Output table
Technical parameter
| Raw material | Galvanized steel sheet; thickness:0.8-2mm |
| Forming speed | About 10-20m/min. |
| Production speed | About 6-8m/min. |
| Material of forming rollers | Gcr15, quenched treatment |
Material of cutter, punching die | Cr12Mov HRC58-60 |
| Material of shaft | High quality 45# steel with heat treatment. Roller grinder milling. |
| Type of cutting | After roll-formed and length-set cutting |
| Total motor power | about 50Kw |
| Control system | Mitsubishi /Siemens PLC |
Machine picture
Machine components
1. (Hydraulic) De-coiler------------------------------1set
2. Leveler------------------------------------------------1set
3. Punching machine----------------------------------1set
4. Cutting device ---------------------------------------1set
5. Forming machine------------------------------------1set
6. PLC control box -------------------------------------1set
7. Hydraulic pump station-----------------------------1set
8. Production support table---------------------------1set
Profile drawing
